Nido Robotics - Sibiu Pro

SIBIU PRO

It includes: 150 m Cable with Quick Connector, 1 Coil Pick-Up Cable, 2 Batteries, 1 Charger, 1 Transport Case, 1 Drone Pilot Course with Nido Robotics

An underwater drone with which you can develop research, inspection and maintenance of submerged systems in the most safe and efficient way you have ever imagined.

Its 1080p camera, specifically optimized for the underwater environment, along with its four 1500 lumens lights will allow you to obtain a clear image in low-light environments.

It incorporates eight propellants, which gives it smoothness and stability in navigation. In addition, the latest generation engineering with which it has been built and its technological innovation allow it to reach depths of up to 300m.

find out more

Main characteristics

Weigth: 16 kg

Camera: 1080p

Maximun depth: 300 m

Battery: 2h (with average use of motors)

Light: 4 X 1500 lumens (regulation control)

Maximum speed: 3 knot

Uses

Thermal Power Stations

Technical Details

PhysicalHeight
28,8 cm
Width
34,3 cm
Length
52,4 cm
Weight without ballast
12,45 kg
Weight with ballast
28,8 cm
Buoyancy Foam
R-3318
Batery connector
XT90
Battery
4S (14.8V, 18Ah)

Tether, Umbilical CableConductors
4 twisted pairs, 26 AWG
Diameter
7,6 mm
Work Force
45 Kg
Breaking Strain
160 Kg
Flotation (Salt water)
Slight positive
Flotation (Fresh water)
Neutral
Reinforcement
with kevlar
Waterproof
Sodium polyacrylate

Performance

Maximum depth

300 m

Propellers

T-200

ESC

Afro 30A

Maximun work current

3 knots

Configuration of propellant

4 Vertical

4 Horizontal

SensorsGyroscope
3-DOF
Accelerometer
3-DOF
Magnetometer
3-DOF
Pressure sensor Bar30 Blue Robotics
Current and voltage sensor
Humidity sensor
Temperature sensor

Minimum Requirements to pilot

A computer with:

2.7 GHz processor

8 GB of RAM

Graphics compatible with Direct 12

Compatible with Windows, Mac and Linux

CameraCamera
1080 Digital
Field of view
110º horizontalmente
Tilt range of the camera
+/- 90º (180º rango total)
EMAX ES08MD 13g Mini Metal
Digital Servo For RC Model

The Software used in our ROVs is an open source solution (GPLv3) that consists of the following modules:

* ArduSub: factory-installed in the ROV as on-board software. It controls the dynamics of the ROV, as well as the functions of self-stabilization and telemetry.

* QGroundControl: Multi-platform application, compatible with Windows 10, OSX and Linux. It allows the user to pilot the ROV while viewing the video and navigation data in real time.

Let’s get moving.

Please fill in the short form in order for us to get back to you to discuss how we can best meet your needs. You can obviously also send us an email or call us on:

sales@nidorobotics.com
(+34) 968733836